Loading

ST 25


Your company can easily experience optimized shredding efficiency once you install and utilize the high-quality power of the Shred-Tech® ST-25 Stationary Shredder. This compact machine is the ideal solution for businesses looking to maximize cost effectiveness and revenue as it provides you with equal amounts of power and durability. Offering a light-duty throughput of up to 1 ton per hour, the shredder is designed to allow you to keep the workflow moving without interruption so you can keep up with the growing demands of the industry. The superior performance of the ST-25 Stationary Shredder makes it the ideal model to drive your business forward and past the competition.

This high-quality shredder works excellently with material up to 16” x 27.5” in size and can effectively reduce bulky loads into easy-to-manage scraps for further processing and use. The machine can be used for a variety of applications, including molded car parts, circuit boards, confidential documents, sharps, medical waste, hard drives, and much more. The shredder is available with a wide range of gear reduced drive ratios fitted with 15, 20, or 25 HP electric motors. Our highly skilled and experienced engineers have included several design refinements to increase the ease of maintenance and shredder durability for the ST-25 Stationary Shredder, including a new torque tube body design that works effortlessly with the increased shaft hex thickness, knife diameter, and spacer thickness.

FEATURES

Applications
The ST-25 Stationary Shredder can be used for the following applications:

  • Aluminum Recycling
  • E-Waste Recycling
  •    - Circuit Board Recycling
  • General Waste Recycling
  • Medical Waste Recycling
  • Metal Recycling
  • Paper Shredding
  • Plastic Recycling
  • Textiles & Carpet Recycling


Standard Features for the ST-25
The dedication of our engineers has resulted in a high-performance ST-25 Stationary Shredder that offers superior durability and higher service factors thanks to the excellent quality of its standard features. Along with bulkhead walls and labyrinth barriers at either end of the cutting chamber, the machine is equipped with other standard features that improve the quality of the shredding process. These include highly durable knives, sturdy hex shafts, and a user-friendly control panel. Each component is engineered to enhance the overall shredding experience for improved serviceability and uptime.

Knives
The ST-25 Stationary Shredder is outfitted with a series of sharp and durable knives that have been designed to bite straight through a range of products and materials. These powerful knives can eat through bulky loads with ease, tearing the materials into shreds as though they were made of butter. Each knife is 7 3/4” in diameter, giving them plenty of strength to shred paper, boxes, plastic parts, hard drives, and more.

Hex Shafts
The hex shaft is uniquely designed to maximize knife placement options so that you experience optimized shredding use for a wide variety of applications. The hex shaft works together with the knives to guarantee maximum shred size on the materials. The shaft is easy to access for easier knife removal and machine maintenance. It is several times stronger than a keyed shaft, and its drive system offers the highest knife-tip cutting force to outperform in the industry.

Control Panel
Everything you need to control the ST-25 Stationary Shredder is available at the powerful control panel included on the ST-25. Designed and fabricated by certified Shred-Tech® technicians, the control panel features several advantages that help you utilize the shredder to its full potential. These include illuminated function buttons, keyed power switched, fused lockable disconnect, an hour meter, and a programmable logic controller for shredder functions, including knife reversal on overload.

Optional Accessories for the ST-25
Along with our offering of high-quality standard accessories, our engineers have also created a variety of solid and reliable optional accessories for the ST-25 Stationary Shredder. Each of these components is engineered to provide optimal support that can push the shredder to its peak capabilities. Among our optional accessories, we offer a hopper, in-feed conveyor, out-feed conveyor, and stand, while further accessories can be added upon request. The Shred-Tech® team is available 24/7 to help you customize your ST-25 Stationary Shredder as well as answer any questions about how we can create a tailored shredding and recycling solution that drives your business forward for years to come, so contact us today!

Hopper
Shred-Tech® hoppers are engineered for optimal durability and usability to keep the flow of materials into the shredder as smooth as possible. This heavy-duty hopper is wide enough to accept a variety of bulky material while it remains durable enough to withstand the constant demand of the job. Its funnel-like design guides material into the shredder in such a manner that helps to prevent buildup or blockage, and it can be modified to suit the application or installation.

In-Feed & Out-Feed Conveyor
For an increase in convenience, we recommend you include either the in-feed conveyor, the out-feed conveyor, or both with your ST-25 Stationary Shredder. In-feed conveyors automatically transport the materials to the shredder for destruction, while out-feed conveyors carry the shredded remains away for collection and sorting. They are designed to keep the workflow moving smoothly without interruption so you can maximize convenience, efficiency, and revenue.

Stand
Adding a stand to your ST-25 Stationary Shredder is an excellent way to make the most of your available facility space. It is designed by our expert engineers to fully support the shredder and lift it off the ground so other equipment can be used. In fact, adding a stand can allow shredded materials to fall via gravity onto downstream equipment, such as a conveyor, to improve convenience and efficiency during the unloading process. It can be modified to fit your requirements and applications.
ST-25 TECHNICAL SPECIFICATIONS
Metric Imperial

PRODUCT SPECIFICATIONS ST 25ES ST 25E ST 25EL
M/C Length1,727 mm.2,083 mm.2,261 mm.
M/C Width 686 mm. 686 mm. 685 mm.
M/C Height 1,981 mm. 1,981 mm. 1,981 mm.
M/C Weight 907 kg. 1,043 kg. 1,134 kg.
Floor Space 1.20 sq.m. 1.50 sq.m. 1.60 sq.m.
Throughput <1 t/hr <1 t/hr <1 t/hr
Size of Material (LxW) - - -
Shred Size/Fraction Size Strips (Inconsistent) Strips (Inconsistent) Strips (Inconsistent)
Drive Electric Electric Electric
Number of Motors 1 1 1
Power 11-18 kw. 11-18 kw. 11-18 kw.
Voltage 208-600 208-600 208-600
Hertz 50/60 50/60 50/60
Knife Thickness 10 16 22 30 mm. 10 16 22 30 mm. 10 16 22 30 mm.
Number of Knives 72, 40, 32, 24 72 40 32 24 72, 40, 32, 24
Knife Diameter 197 mm. 197 mm. 197 mm.
Hex Size 68 mm. 68 mm. 68 mm.
Distance Between Shafts 149 mm. 149 mm. 149 mm.
Cutting Chamber (LxW) 699 x 406 mm. 699 x 406 mm. 699 x 406 mm.
Discharge Height 1,016 mm. 1,016 mm. 1,016 mm.
Hopper Height 508 mm. 508 mm. 508 mm.
Hopper Opening - - -
Stand Opening (Width) 533 mm. 533 mm. 533 mm.
Stand Opening (Length) 762 mm. 1,118 mm. 1,295 mm.
Application Plastic, Metal, Paper, E-Waste, Medical Waste, Textile & Carpet, Aluminum, General Waste, Circuit Boards Plastic, Metal, Paper, E-Waste, Medical Waste, Textile & Carpet, Aluminum, General Waste, Circuit Boards Plastic, Metal, Paper, E-Waste, Medical Waste, Textile & Carpet, Aluminum, General Waste, Circuit Boards
OPTIONAL FEATURES

PLC Interfacing for Peripheral Equipment

Custom Stands and Hoppers

Feed and Discharge Conveyors

Pneumatic or Hydraulic Ram

Vibrating, Magnetic or Rotary Separation

Airveying Discharge

Trommel Rinse System

Explosion Proof Motors

PRODUCT SPECIFICATIONSST 25ESST 25EST 25EL
M/C Length688289
M/C Width272727
M/C Height 78 78 78
M/C Weight2,000 lbs2,300 lbs2,500 lbs
Floor Space13.00 sq.ft.16.00 sq.ft.17.00 sq.ft.
Throughput<1 t/hr<1 t/hr<1 t/hr
Size of Material (LxW) 16" x 27.5" 16" x 27.5" 16" x 27.5"
Shred Size/Fraction Size Strips (Inconsistent) Strips (Inconsistent) Strips (Inconsistent)
DriveElectricElectricElectric
Number of Motors111
Power 15-25 HP 15-25 HP 15-25 HP
Voltage 208-600 208-600 208-600
Hertz50/6050/6050/60
Knife Thickness3/8" 5/8" 7/8" 1 3/16"3/8" 5/8" 7/8" 1 3/16"3/8" 5/8" 7/8" 1 3/16"
Number of Knives72, 40, 32, 2472 40 32 2472, 40, 32, 24
Knife Diameter7 3/4"7 3/4"7 3/4"
Hex Size 2 11/16" 2 11/16" 2 11/16"
Distance Between Shafts 5 7/8" 5 7/8" 5 7/8"
Cutting Chamber (LxW) 27 1/2" x 16" 27 1/2" x 16" 27 1/2" x 16"
Discharge Height 40" 40" 40"
Hopper Height 20" 20" 20"
Hopper Opening - - -
Stand Opening (Width) 21" 21" 21"
Stand Opening (Length) 30" 44" 51"
Application Plastic, Metal, Paper, E-Waste, Medical Waste, Textile & Carpet, Aluminum, General Waste, Circuit Boards Plastic, Metal, Paper, E-Waste, Medical Waste, Textile & Carpet, Aluminum, General Waste, Circuit Boards Plastic, Metal, Paper, E-Waste, Medical Waste, Textile & Carpet, Aluminum, General Waste, Circuit Boards
OPTIONAL FEATURES

PLC Interfacing for Peripheral Equipment

Custom Stands and Hoppers

Feed and Discharge Conveyors

Pneumatic or Hydraulic Ram

Vibrating, Magnetic or Rotary Separation

Airveying Discharge

Trommel Rinse System

Explosion Proof Motors

Metric Imperial

Model/Spec M/C Length x Width x Height
(mm.)
M/C Weight
(kg)
Floor Space
(sq.m.)
Drive Power
(kw)
Voltage Hertz Knife Thickness (STD) (mm.) Hex Size
(mm.)
Distance Between Shafts(mm.) Cutting Chamber (mm.) Discharge Height (mm.) Hopper Height (mm.) Hopper Opening (mm.) Stand Opening
Width (mm.)
Stand Opening Length (mm.) Number of Motors Number of Knives Knife Diameter (mm.)
ST-25ES 1,727 x 686 x 1,981 907 1.20 Electric 11-18 208-600 50/60 10 16 22 30 68 149 699 x 406 1,016 508 - 533 762 1 72 197
ST-25E 2,083 x 686 x 1,981 1,043 1.50 Electric 11-18 208-600 50/60 10 16 22 30 68 149 699 x 406 1,016 508 - 533 1,118 1 72 197
ST-25EL 2,261 x 685 x 1,981 1,134 1.60 Electric 11-18 208-600 50/60 10 16 22 30 68 149 699 x 406 1,016 508 - 533 1,295 1 72 197
ST-5 Stationary Shredder 1,607 x 914 x 1,524 408 0.97 Electric 3.7 208-600 50/60 42 60 152 127x318 / 76.2 x 318 762 381 32x127 533 597 1 - 165.1 / 171.45
ST-15E 1,473 x 1,016 x 2,286 612 1.50 Electric 7.35-22 208-600 50/60 6.35, 9.5, 15.8, 30 68 149 533 x 330 1,016 965 599 x 711 762 965 1 73, 50, 30, 14 171
ST-35 2,083 x 1,626 x 2,667 1,279 3.40 Electric 22 - 40 208-600 50/60 16 13 102 203 635 x 533 1,016 1,118 533 533 1,016 2 46 52 241
ST-50E 2,794 x 1,143 x 2,718 2,359 3.10 Electric 30-37 208-600 50/60 16 22 30 41 86 191 1,016 x 533 1,016 1,118 1,016 x 1,016 533 1,905 1 or 2 64, 48, 32, 24 254
ST-50EL 3,048 x 1,143 x 2,718 2,359 3.50 Electric 30-37 208-600 50/60 16 22 30 41 86 191 1,270 x 533 1,016 1,118 1,270 x 1,016 533 1,905 1 or 2 64, 48, 32, 24 254
ST-75L 3,722 x 1,295 x 2,667 4,173 4.80 Electric 45-75 208-600 50/60 16, 22, 25, 38, 51 110 240 1,590 x 635 1,067 864 1,575 x 1,168 635 2,235 1 or 2 90 60 40 318
ST-75E 3,404 x 1,295 x 2,667 3,810 4.40 Electric 45-75 208-600 50/60 16, 22, 25, 38, 51 110 240 1,273 x 635 1,067 864 1,270 x 1,168 635 1,930 1 or 2 72 48 32 318
ST-75H 2,545 x 1,295 x 2,667 3,130 3.30 Hydraulic 56 208-600 50/60 16, 22, 25, 38, 51 110 240 1273 x 635 1,067 864 1,270 x 1,168 635 1,930 1 or 2 72 48 32 318
ST-75ES 3,073 x 1,295 x 2,667 3,447 4.00 Electric 45-75 208-600 50/60 16, 22, 25, 38, 51 110 240 956 x 635 1,067 864 965 x 1,168 25 1,626 1 or 2 54 36 24 318
ST-75HS 2,184 x 1,295 x 2,667 2,767 2.90 Hydraulic 56 208-600 50/60 16, 22, 25, 38, 51 110 240 956 x 635 1,067 864 965 x 1,168 635 1,626 1 or 2 54 36 24 318
ST-100E 3,683 x 1,397 x 2,794 6,577 5.10 Electric 45-112 208-600 50/60 38 48 64 137 308 1,537 x 813 1,092 940 1,524 x 1,372 838 2,362 1 or 2 40 32 24 413
ST-100H 2,921 x 1,397 x 2,794 5,488 4.00 Hydraulic 75-112 208-600 50/60 38 48 64 137 308 1,537 x 813 1,092 940 1,524 x 1,372 838 2,362 1 or 2 40 32 24 413
ST-100ES 3,302 x 1,397 x 2,794 5,534 4.60 Electric 45-112 208-600 50/60 38 48 64 137 308 1,143 x 813 1,092 940 1,524 x 1,372 838 1,981 1 or 2 30 24 18 413
ST-100HS 2,540 x 1,397 x 2,794 4,672 3.50 Hydraulic 75-112 208-600 50/60 38 48 64 137 308 1,143 x 813 1,092 940 1,524 x 1,372 838 1,981 1 or 2 30 24 18 413
ST-300ES 3,912 x 1,651 x 711 8,618 6.50 Electric 75-149 208-600 50/60 41, 48, 59, 73 168 381 1651 x 1016 1,219 1,270 - 1,295 2,743 2 43, 34, 27, 22 508
ST-300E 3,912 x 1,651 x 711 9,525 6.90 Electric 75-149 208-600 50/60 41, 48, 59, 73 168 381 1651 x 1016 1,219 1,270 - 1,295 3,048 2 43, 34, 27, 22 508
ST-300EL 3,912 x 1,651 x 711 10,433 7.30 Electric 75-149 208-600 50/60 41, 48, 59, 73 168 381 1651 x 1016 1,219 1,270 - 1,295 3,302 2 43, 34, 27, 22 508
ST-400ES 4,357 x 1,956 x 4,064 13,608 8.40 Electric 441-883 208-600 50/60 38 48 73 76 177 or 203 432 1,346 x 1,168 2,032 1,016 - 1,194 2,161 2 35 28 22 18 578
ST-400E 4,662 x 1,956 x 4,064 14,969 8.90 Electric 441-883 208-600 50/60 38 48 73 76 177 or 203 432 1,651 x 1,168 2,032 1,016 - 1,194 2,997 2 43 34 27 22 578
ST-400EL 4,931 x 1,956 x 4,064 15,876 9.30 Electric 441-883 208-600 50/60 38 48 73 76 177 or 203 432 1,905 x 1,168 2,032 1,016 - 1,194 3,531 2 50 40 31 26 578
ST-400EXL 5,222 x 1,956 x 4,064 17,236 9.80 Electric 441-883 208-600 50/60 38 48 73 76 177 or 203 432 2,210 x 1,168 2,032 1,016 - 1,194 3,835 2 57 46 36 30 578
ST-1200HS 4,356 x 2,530 x 4,388 32,037 11.10 Hydraulic 447-895 - - 74.6 276 606 1,575 x 1,778 2,070 1,487 2,089 x 1,799 2,692 2,362 2 24 806
ST-1200H 4,940 x 2,530 x 4,388 35,380 12.50 Hydraulic 447-895 - - 74.6 276 606 1,575 x 2,369 2,070 1,487 2,089 x 2,388 3,277 2,362 2 32 806
ST-1200HL 5,531 x 2,530 x 4,388 38,737 14.00 Hydraulic 447-895 - - 74.6 276 606 1,575 x 2,959 2,070 1,487 2,089 x 2,978 3,861 2,362 2 40 806
ST-15ES 1,372 x 1,016 x 2,286 567 1.40 Electric 7.35-22 208-600 50/60 6.35, 9.5, 15.8, 30 68 149 432 x 330 1,016 965 559 x 610 762 864 1 73, 50, 30, 14 171
ST-50ES 2,540 x 1,143 x 2,718 2,223 2.78 Electric 15-37 208-600 50/60 16 22 30 41 86 191 533 x 762 1,016 1,118 762 x 1,016 533 1,397 1 or 2 64, 48, 32, 24 254
ST-5 Portable Shredder - x - x - 408 0.98 Electric 2.2 208-240 50/60 41.3 / 9.5 60.3 152.4 127 x 317.5 / 76.2 x 317.5 - 381 - - - 1 - 165.1 / 171.45
ST-8 Stationary Shredder - x - x - - - Electric 11 - - - 84.8 190.5 401.6 x 101.6 / 401.6 x 139.7 330 1,270 - - - 1 5 / 14 203.2 / 203.2

Model/Spec M/C Length x Width x Height
(")
M/C Weight
(lbs)
Floor Space
(sq.ft.)
Drive Power
(HP)
Voltage Hertz Knife Thickness (STD) (") Hex Size
(")
Distance Between Shafts(") Cutting Chamber (") Discharge Height (") Hopper Height (") Hopper Opening (") Stand Opening Width (") Stand Opening Length (") Number of Motors Number of Knives Knife Diameter (")
ST-25ES 2,000 13 Electric 15-25 208-600 50/60 3/8" 5/8" 7/8" 1 3/16" 2 11/16" 5 7/8" 27 1/2" x 16" 40" 20" - 21" 30" 1 72 7 3/4"
ST-25E 2,300 16 Electric 15-25 208-600 50/60 3/8" 5/8" 7/8" 1 3/16" 2 11/16" 5 7/8" 27 1/2" x 16" 40" 20" - 21" 44" 1 72 7 3/4"
ST-25EL 2,500 17 Electric 15-25 208-600 50/60 3/8" 5/8" 7/8" 1 3/16" 2 11/16" 5 7/8" 27 1/2" x 16" 40" 20" - 21" 51" 1 72 7 3/4"
ST-5 Stationary Shredder 42 " x 36 " x 60" 900 10 1/2 Electric 5 208-600 50/60 1 5/8" 2 3/8" 6" 5"x12 1/2" / 3"x12 1/2" 30" 15" 1 1/4" x 5" 21" 23 1/2" 1 - 6 1/2" / 6 3/4"
ST-15E 58 " x 40 " x 90" 1,350 16 Electric 10-30 208-600 50/60 1/4", 3/8", 5/8", 1 3/16" 2 11/16" 5 7/8" 21" x 13" 40" 38" 22" x 28" 30" 38" 1 73, 50, 30, 14 6 3/4"
ST-35 82 " x 64 " x 105" 2,820 37 Electric 30 - 55 208-600 50/60 5/8" 1/2" 4" 8" 25" x 21" 40" 44" 21" 21" 40" 2 46 52 9 1/2"
ST-50E 110 " x 45 " x 107" 5,200 34 Electric 40-45 208-600 50/60 5/8", 7/8", 1 3/16", 1 5/8" 3 3/8" 7 1/2" 40" x 21" 40" 44" 40" x 40" 21" 75" 1 or 2 64, 48, 32, 24 10"
ST-50EL 120 " x 45 " x 107" 5,500 38 Electric 40-50 208-600 50/60 5/8", 7/8", 1 3/16", 1 5/8" 3 3/8" 7 1/2" 50" x 21" 40" 44" 50" x 40" 21" 75" 1 or 2 64, 48, 32, 24 10"
ST-75L 147 " x 51 " x 105" 9,200 52 Electric 60-100 208-600 50/60 5/8", 7/8", 1", 1 1/2", 2" 4 5/16" 9 7/16" 25" x 62 5/8" 42" 34" 62" x 46" 25" 88" 1 or 2 90 60 40 12 1/2"
ST-75E 134 " x 51 " x 105" 8,400 48 Electric 60-100 208-600 50/60 5/8", 7/8", 1", 1 1/2", 2" 4 5/16" 9 7/16" 50 1/8" x 25" 42" 34" 50" x 46" 25" 76" 1 or 2 72 48 32 12 1/2"
ST-75H 99 " x 51 " x 105" 6,900 35 Hydraulic 75 208-600 50/60 5/8", 7/8", 1", 1 1/2", 2" 4 5/16" 9 7/16" 50 1/8" x 25" 42" 34" 50" x 46" 25" 76" 1 or 2 72 48 32 12 1/2"
ST-75ES 121 " x 51 " x 105" 7,600 43 Electric 60-100 208-600 50/60 5/8", 7/8", 1", 1 1/2", 2" 4 5/16" 9 7/16" 37 5/8" x 25" 42" 34" 38" x 46" 635" 64" 1 or 2 54 36 24 12 1/2"
ST-75HS 86 " x 51 " x 105" 6,100 31 Hydraulic 75 208-600 50/60 5/8", 7/8", 1", 1 1/2", 2" 4 5/16" 9 7/16" 37 5/8" x 25" 42" 34" 38" x 46" 25" 64" 1 or 2 54 36 24 12 1/2"
ST-100E 145 " x 55 " x 110" 14,500 55 Electric 60-150 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 5 3/8" 12 1/8" 60 1/2" x 32" 43" 37" 60" x 54" 33" 93" 1 or 2 40 32 24 16 1/4"
ST-100H 115 " x 55 " x 110" 12,100 44 Hydraulic 100-150 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 5 3/8" 12 1/8" 60 1/2" x 32" 43" 37" 60" x 54" 33" 93" 1 or 2 40 32 24 16 1/4"
ST-100ES 130 " x 55 " x 110" 12,200 50 Electric 60-150 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 5 3/8" 12 1/8" 45" x 32" 43" 37" 60" x 54" 33" 78" 1 or 2 30 24 18 16 1/4"
ST-100HS 100 " x 55 " x 110" 10,300 38 Hydraulic 100-150 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 5 3/8" 12 1/8" 45" x 32" 43" 37" 60" x 54" 33" 78" 1 or 2 30 24 18 16 1/4"
ST-300ES 154 " x 65 " x 28" 19,000 70 Electric 100-200 208-600 50/60 1 5/8", 1 7/8", 2 1/3", 2 7/8" 6 5/8" 15" 65" x 40" 48" 50" - 51" 108" 2 43, 34, 27, 22 20"
ST-300E 166 " x 65 " x 28" 21,000 75 Electric 100-200 208-600 50/60 1 5/8", 1 7/8", 2 1/3", 2 7/8" 6 5/8" 15" 65" x 40" 48" 50" - 51" 120" 2 43, 34, 27, 22 20"
ST-300EL 176 " x 65 " x 28" 23,000 79 Electric 100-200 208-600 50/60 1 5/8", 1 7/8", 2 1/3", 2 7/8" 6 5/8" 15" 65" x 40" 48" 50" - 51" 130" 2 43, 34, 27, 22 20"
ST-400ES 168 " x 77 " x 160" 30,000 90 Electric 600-1200 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 3" 7" or 8" 17" 53" x 46" 80" 40" - 47" 103" 2 35 28 22 18 22 3/4"
ST-400E 180 " x 77 " x 160" 33,000 96 Electric 600-1200 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 3" 7" or 8" 17" 65" x 46" 80" 40" - 47" 118" 2 43 34 27 22 22 3/4"
ST-400EL 190 " x 77 " x 160" 35,000 100 Electric 600-1200 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 3" 7" or 8" 17" 75" x 46" 80" 40" - 47" 139" 2 50 40 31 26 22 3/4"
ST-400EXL 200 " x 77 " x 160" 38,000 106 Electric 600-1200 208-600 50/60 1 1/2" 1 7/8" 2 1/2" 3" 7" or 8" 17" 87" x 46" 80" 40" - 47" 151" 2 57 46 36 30 22 3/4"
ST-15ES 54 " x 40 " x 90" 1,250 15.5 Electric 10-30 208-600 50/60 1/4", 3/8", 5/8", 1 3/16" 2 11/16" 5 7/8" 17" x 13" 40" 38" 22" x 24" 30" 34" 1 73, 50, 30, 14 6 3/4"
ST-50ES 100 " x 45 " x 107" 4,900 30 Electric 40-50 208-600 50/60 5/8", 7/8", 1 3/16", 1 5/8" 3 3/8" 7 1/2" 21" x 30" 40" 44" 30" x 40" 21" 55" 1 or 2 64, 48, 32, 24 10"
ST-5 Portable Shredder - x - x - 900 10 1/2" Electric 3 208-240 50/60 1 5/8" / 3/8" 2 3/8" 6" 5" x 12 1/2" / 3" x 12 1/2" - 43 1/2" - - - 1 - 6 1/2" / 6 3/4"
ST-8 Stationary Shredder - x - x - - - Electric 15 - - 3 11/32" 7.5" 15 13/16" x 4" / 15 13/16" x 5 3/6" 13" x 21" 50" - - - 1 5 / 14 8" / 8"