Loading

MDS-4


Our latest and greatest MDS model, the MDS-4, has 2 motors and the largest cutting chamber of all the trucks in our MDS line. Made to shred efficiently and effectively.

*Product specifications subject to change without notice.

FEATURES

SHREDDER The MDS-Line gets its amazing performance from the proven ST-15H and ST-35H shredders. The cast aluminum shredders have exceptional strength without the weight of steel. Throughput on the ST-15H can range from 2,041 kg/hr to 3,175 kg/hr, and up to 5,443 kg/hr on the ST-35H. The shredders feature hub knives, high strength alloy shafts as well as two all-new patent pending innovations: cast-in cleaning fingers and a bridgeless vibrating feed hopper.

BIN TUNNEL AND CONTROLS The MDS-Line is equipped with Shred-Tech's proprietary and patented Gripper Tipper. This bin tunnel loading system allows for quick and easy loading of all industry standard containers. It ensures confidential information is protected from the elements, as it is kept secure and enclosed at all times. The state of the art Plus+1 micro-control system with advanced intelligence is powerful enough to not only control and monitor the system but it also allows for a job timer, an automatic bin counter, advanced diagnostics and Predictive Idle to name a few of the features. The Plus+1 system offers a level of control, and range of features that are not possible with older analog control panels.

AUGER COMPACTOR AND AUTO UNLOADING Equipped with Shred-Tech's angled compactor design and durable moving floor unloading system, these features ensure maximum payload of up to 14,000 lbs and rapid discharge of shredded material within a few minutes. This means more time on-route shredding paper and generating revenue.

ENVIRONMENTAL STEWARDSHIP Our MDS Fleet meets the EPA's strict new low emissions standards and operates on ULSD (ultra-low sulfur diesel fuel) or B5 Biodiesel fuel. All MDS trucks are equipped with Shred-Tech's Predictive Idle with auto shutdown and remote panel start/stop. Predictive Idle senses low shredder loads and shuts off the high engine idle when the shredder is unattended and the hopper is empty. Moments later the PTO's are turned off along with the engine, reducing fuel consumption and lowering engine hours.

**Two Year Limited Warranty
MDS-4 TECHNICAL SPECIFICATIONS
Metric Imperial

PRODUCT SPECIFICATIONS MDS-4 -33 MDS-4 -52
Throughput Up To (kg/hr)* 5,443 5,443
Legal Payload Up To (kg)** 4,990 8,165
SHRED SIZE
NAID AAA S S
MEASUREMENTS
Chassis GVW 14,969 kg. 25,401 kg.
Empty Weight 9,979 kg. 14,969 kg.
Length 787mm. 203mm. 991mm. 203mm.
Width 203 mm. 203 mm.
Height 330 mm 330 mm
PRODUCT SPECIFICATIONS
Drive Hydraulic Hydraulic
Number of Motors 2 2
Shredder Power 170 kw. 170 kw.
Knife Thickness 16 mm. 16 mm.
Number of Knives 46 46
Knife Diameter 241 mm. 241 mm.
Hex Size 85.7 mm. 85.7 mm.
Distance Between Shafts 192.5 mm. 192.5 mm.
Cutting Chamber (LxW) 667 x 533 mm. 667 x 533 mm.
ENGINEERING
Shred-Tech® Shredder Model MDS-4 -33 MDS-4 -52
Auger Compactor S S
Automated Infeed Hopper S S
Patented Retractable Bin Tunnel S S
Gripper Tipper® Cart Lift S S
FRP Unibody S S
Aluminium Hydraulic Reservoir S S
Main Control Panel c/w Micro Controller S S
Ground Control Panel & Video Monitoring S S
PTO/Hydraulic Drive Configuration S S
Walking Floor Unloading System S S
Remote Start & Stop W/Parallel Chassis Ignition S S
Predictive Idle With Auto Shut Down S S
Shredding and Storage Area Cameras S S
Product Destruction S S
CHASSIS
Freightliner M2 106 S S
All Other Makes O O
S = Standard O = Option X = Not Available

*Throughput is an estimate based on actual test data and can vary depending upon many factors, including paper type, system maintenance and operator training.

**Legal Payload Capacity is an estimate based on chassis GVRW only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee throughput or payload results.

PRODUCT SPECIFICATIONS MDS-4 -33 MDS-4 -52
Throughput Up To (lbs/hr)* 12,000 12,000
Legal Payload Up To (lbs)** 11,000 18,000
SHRED SIZE
NAID AAA S S
MEASUREMENTS
Chassis GVW 33,000 lbs. 56,000 lbs.
Empty Weight 22,000 lbs. 33,000 lbs.
Length 31" 8" 39" 8"
Width 8" 8"
Height 13" 13"
PRODUCT SPECIFICATIONS
Drive Hydraulic Hydraulic
Number of Motors 2 2
Shredder Horsepower 228 228
Knife Thickness 5/8" 5/8"
Number of Knives 46 46
Knife Diameter 9.5" 9.5"
Hex Size 3 3/8" 3 3/8"
Distance Between Shafts 7 1/2" 7 1/2"
Cutting Chamber (LxW) 26 1/4" x 21" 26 1/4" x 21"
ENGINEERING
Shred-Tech® Shredder Model MDS-4 -33 MDS-4 -52
Auger Compactor S S
Automated Infeed Hopper S S
Patented Retractable Bin Tunnel S S
Gripper Tipper® Cart Lift S S
FRP Unibody S S
Aluminium Hydraulic Reservoir S S
Main Control Panel c/w Micro Controller S S
Ground Control Panel & Video Monitoring S S
PTO/Hydraulic Drive Configuration S S
Walking Floor Unloading System S S
Remote Start & Stop W/Parallel Chassis Ignition S S
Predictive Idle With Auto Shut Down S S
Shredding and Storage Area Cameras S S
Product Destruction S S
CHASSIS
Freightliner M2 106 S S
All Other Makes O O
S = Standard O = Option X = Not Available

*Throughput is an estimate based on actual test data and can vary depending upon many factors, including paper type, system maintenance and operator training.

**Legal Payload Capacity is an estimate based on chassis GVRW only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee throughput or payload results.