Loading

MDS-3


The MDS-3 is all about performance, with class leading single axle payload of up to 6,350 kg and throughput up to 3,175 kg/hr, making it the #1 selling shredding truck in the world. The MDS- 3 is designed to be cost efficient, reliable and competitively priced.

*Product specifications subject to change without notice.

FEATURES

SHREDDER The MDS-Line gets its amazing performance from the proven ST-15H and ST-35H shredders. The cast aluminum shredders have exceptional strength without the weight of steel. Throughput on the ST-15H can range from 2,041 kg/hr to 3,175 kg/hr, and up to 5,443 kg/hr on the ST-35H. The shredders feature hub knives, high strength alloy shafts as well as two all-new patent pending innovations: cast-in cleaning fingers and a bridgeless vibrating feed hopper.

BIN TUNNEL AND CONTROLS The MDS-Line is equipped with Shred-Tech's proprietary and patented Gripper Tipper. This bin tunnel loading system allows for quick and easy loading of all industry standard containers. It ensures confidential information is protected from the elements, as it is kept secure and enclosed at all times.
The state of the art Plus+1 micro-control system with advanced intelligence is powerful enough to not only control and monitor the system but it also allows for a job timer, an automatic bin counter, advanced diagnostics and Predictive Idle to name a few of the features. The Plus+1 system offers a level of control, and range of features that are not possible with older analog control panels.

AUGER COMPACTOR AND AUTO UNLOADING Equipped with Shred-Tech's angled compactor design and durable moving floor unloading system, these features ensure maximum payload of up to 6,350 kg and rapid discharge of shredded material within a few minutes. This means more time on-route shredding paper and generating revenue.

ENVIRONMENTAL STEWARDSHIP Our MDS Fleet meets the EPA's strict new low emissions standards and operates on ULSD (ultra-low sulfur diesel fuel) or B5 Biodiesel fuel. All MDS trucks are equipped with Shred-Tech's Predictive Idle with auto shutdown and remote panel start/stop. Predictive Idle senses low shredder loads and shuts off the high engine idle when the shredder is unattended and the hopper is empty. Moments later the PTO's are turned off along with the engine, reducing fuel consumption and lowering engine hours.

**Two Year Limited Warranty
MDS-3 TECHNICAL SPECIFICATIONS
Metric Imperial

PRODUCT SPECIFICATIONS MDS-3-26 MDS-3-33
Throughput Up To (kg/hr)* 3,175 3,175
Legal Payload Up To (kg)** 3,765 6,350
SHRED SIZE
NAID AAA S S
MEASUREMENTS
Chassis GVW 11,794 kg. 14,969 kg.
Empty Weight 8,029 kg. 8,618 kg.
Length 686mm. 254mm. 787 mm.
Width 203 mm. 203 mm.
Height 305mm. 152mm. 330 mm.
PRODUCT SPECIFICATIONS
Drive Hydraulic Hydraulic
Number of Motors 1 1
Shredder Power 85 kw. 85 kw.
Knife Thickness 16 mm. 16 mm.
Number of Knives 36 36
Knife Diameter 175 mm. 175 mm.
Hex Size 68.2 mm. 68.2 mm.
Distance Between Shafts 149.2 mm. 149.2 mm.
Cutting Chamber (LxW) 533 x 356 mm. 533 x 356 mm.
ENGINEERING
Shred-Tech® Shredder Model MDS-3-26 MDS-3-33
Auger Compactor S S
Automated Infeed Hopper S S
Patented Retractable Bin Tunnel S S
Gripper Tipper® Cart Lift S S
FRP Unibody S S
Aluminium Hydraulic Reservoir S S
Main Control Panel c/w Micro Controller S S
Ground Control Panel & Video Monitoring S S
PTO/Hydraulic Drive Configuration S S
Walking Floor Unloading System S S
Remote Start & Stop W/Parallel Chassis Ignition S S
Predictive Idle With Auto Shut Down S S
Shredding and Storage Area Cameras S S
Product Destruction S S
CHASSIS
Freightliner M2 106 S S
All Other Makes O O
S = Standard O = Option X = Not Available

*Throughput is an estimate based on actual test data and can vary depending upon many factors, including paper type, system maintenance and operator training.

**Legal Payload Capacity is an estimate based on chassis GVRW only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee throughput or payload results.

PRODUCT SPECIFICATIONS MDS-3-26 MDS-3-33
Throughput Up To (lbs/hr)* 7,000 7,000
Legal Payload Up To (lbs)** 8,300 14,000
SHRED SIZE
NAID AAA S S
MEASUREMENTS
Chassis GVW 26,000 lbs. 33,000 lbs.
Empty Weight 17,700 lbs. 19,000 lbs.
Length 27" 10" 31"
Width 8" 8"
Height 12" 6" 13"
PRODUCT SPECIFICATIONS
Drive Hydraulic Hydraulic
Number of Motors 1 1
Shredder Horsepower 114 114
Knife Thickness 5/8" 5/8"
Number of Knives 36 36
Knife Diameter 6.9" 6.9"
Hex Size 2 11/16" 2 11/16"
Distance Between Shafts 5 7/8" 5 7/8"
Cutting Chamber (LxW) 21"x14" 21"x14"
ENGINEERING
Shred-Tech® Shredder Model MDS-3-26 MDS-3-33
Auger Compactor S S
Automated Infeed Hopper S S
Patented Retractable Bin Tunnel S S
Gripper Tipper® Cart Lift S S
FRP Unibody S S
Aluminium Hydraulic Reservoir S S
Main Control Panel c/w Micro Controller S S
Ground Control Panel & Video Monitoring S S
PTO/Hydraulic Drive Configuration S S
Walking Floor Unloading System S S
Remote Start & Stop W/Parallel Chassis Ignition S S
Predictive Idle With Auto Shut Down S S
Shredding and Storage Area Cameras S S
Product Destruction S S
CHASSIS
Freightliner M2 106 S S
All Other Makes O O
S = Standard O = Option X = Not Available

*Throughput is an estimate based on actual test data and can vary depending upon many factors, including paper type, system maintenance and operator training.

**Legal Payload Capacity is an estimate based on chassis GVRW only. Actual payload can vary depending on many factors including paper type, weather conditions, and system maintenance. Shred-Tech does not guarantee throughput or payload results.